How to clean the vertical CNC V groover in summer
Because the vertical slot planer fuselage layout is disorderly, the volume is big, has brought the corresponding difficulty to the ordinary cleaning, therefore many people ignored its cleaning maintenance. Adhere to the cleaning of the equipment, can make its normal work and safe operation. It should be cleaned completely. Brush the dust off the surface with a brush, clean the dirt area with detergent, and dry it in a ventilated place in time to avoid rusting.
Before starting the engine of the vertical grooving machine, the bearing bush and other smooth parts should be reasonably smooth. After starting the engine, when the ratio and water temperature rise to 40 ℃ – 50 ℃, the machine can start to work again, and it is forbidden to work under full load for a long time. When the temperature drops to 40 ℃ – 50 ℃ after closing the equipment in winter, drain the cooling water and write antifreeze.
Usually, users need to pay attention to the useful maintenance of the vertical grooving machine engine, so that it is in a good working condition. Pay attention to frequent investigation, frequent inspection, find problems, timely cleaning.