Air Plasma Cutting Machine economy, efficiency, applicability
The air plasma cutting machine must use shielding gas when processing. Air is of course a simple and economic shielding gas, and the role of the air compressor is to compress part of the air with high-purity oxygen and high-purity …
The economic, efficiency and applicability of air plasma cutting machine. The air plasma cutting machine must use shielding gas during processing. Air is of course a simple and economic shielding gas. The role of the air compressor is to form a part of compressed air with high-purity oxygen and high-purity nitrogen. The cutting gas is provided to the cutting head. One part is used as the power source to supply the cylinder of the clamping table, and the other part is used to purge and remove the light path system. The compressed air discharged from the air enters the air control cabinet through the air storage tank and the dryer, and then passes through a set of precision The processing system turns into clean and dry gas, which is finally divided into three channels, which are used as cutting gas, cylinder power source and optical path positive pressure dust removal gas to maintain the normal operation of the air plasma cutting machine, so the air compressor is a must for every air plasma cutting machine equipment. Indispensable, it is also very important for air plasma cutting machine.
The air is provided directly by the air compressor, so the price is very cheap compared to other gases. Although the air contains about 20% oxygen, the cutting efficiency is far less than oxygen, and the cutting capacity is similar to nitrogen. A small amount of oxide film will appear on the cutting surface, but it can be used as a measure to prevent the coating film from falling off. The incision face yellowed.
The main applicable materials are aluminum, aluminum alloy, stainless copper, brass, electroplated steel plate, etc.