Management of CNC V Grooving Machine
The CNC v grooving machine is also called a slotting machine. It is a slotting machine that is more commonly used at present. Let me talk about the inspection and management of the slotting machine:
The inspection of the CNC v grooving machine can be divided into two levels: daily inspection and full-time inspection.The daily inspection is responsible for the inspection of the general components of the machine tool, and the faults that occur during the operation of the machine tool are processed and checked by the machine operator. , Full-time inspection is responsible for the key parts and important parts of the machine tool to carry out key inspections and equipment status monitoring and fault diagnosis on a periodic basis, formulate inspection plans, make diagnostic records, analyze maintenance results, and propose suggestions for improving equipment maintenance management. Maintenance personnel. As a working system, the inspection of the CNC v grooving machine must be carefully implemented and persevered in order to ensure the normal operation of the machine tool.For easy operation, the content of the inspection of the CNC v grooving machine can be listed in a concise and concise form.
The inspection of the CNC v grooving machine is the basis for the status monitoring and fault diagnosis work. It mainly includes the following contents: first of all, it is necessary to determine how many maintenance points a CNC v grooving machine has, and scientifically analyze this equipment to find out the possibility. As long as the maintenance points are checked, the faults will be discovered in time.
Calibration, we must formulate standards for each maintenance point of the boat, such as gap, temperature, pressure, flow rate, tightness, etc., there must be a clear quantitative standard, as long as it does not exceed the specified standard, it is not a failure.
Regularly, how often to check, the inspection cycle must be determined, some points may be checked for boat shifts, and some points may be checked once or every month, depending on the specific circumstances.
For fixed items, each maintenance point should also have clear regulations on which items to check.Each point may check one or several items.