Can Fiber Laser Cutting Machine cut copper material?
The cutting of highly reflective materials by fiber laser cutting machines is an important problem for many fiber laser cutting machine manufacturers. High-reflective metal materials have always been difficult to cut by fiber laser cutting machines, including copper, aluminum, etc. These materials are also relatively common materials in our daily processing.
For the cutting of copper products, many workers have many problems with the specific operation and parameter adjustment of fiber laser cutting machines. Cutting is not just using machine cutting, but also requires some experience issues. Below we will introduce you specifically Let’s see how a fiber laser cutting machine cuts copper materials.
When cutting high-reflective metal materials need to add auxiliary gas, when the fiber laser cutting machine cuts metal copper, the added auxiliary gas reacts with the material under high temperature conditions, increasing the cutting speed, for example, using oxygen can achieve the effect of combustion. In terms of fiber laser cutting equipment, nitrogen is an auxiliary gas to improve the cutting effect. For copper materials below 1MM, fiber laser cutting machines can be used for processing.
Therefore, when using a fiber laser cutting machine, there is no need to worry about whether it can cut off. At this time, it should pay attention to the processing effect, so it is best to use nitrogen as the auxiliary gas. When the thickness of the metal copper reaches 2MM, it cannot be processed with nitrogen. At this time, oxygen must be added to oxidize it to achieve cutting.
Through the above explanation, everyone should know how to use copper materials for fiber laser cutting machines. In fact, when we cut, we do not focus on whether we can cut the material and how much it is cut in an hour, but on the accuracy of cutting. . How to grasp the cutting accuracy of the fiber laser cutting machine is the most important.