Fiber laser cutting machines have to say “skin care”
The cost of fiber laser cutting machine is relatively expensive, which is determined by its value. The same expensive things need to be matched and repaired to achieve the most perfect effect.
1. Fan cleaning is essential (maintenance cycle: once a month)
The fan is used on the machine for a long time, which causes a large amount of solid dust to accumulate in the fan and the air pipe, which makes the fan generate a lot of noise, and is not conducive to dust and deodorization.
Maintenance method: Loosen the connection hose between the exhaust pipe and the fan, remove the exhaust pipe, and clean the dust in the exhaust pipe and the fan.
2. The water tank should be cleaned (maintenance period: half a year or once before long-term use)
Before the machine works, the water quality of the water cooler water tank must be checked. The water quality and temperature of the circulating water directly affect the service life of the laser.
Maintenance method: regularly replace the circulating water and clean the water tank.
3. Day-to-day lens cleaning (maintenance cycle: morning and evening protective glasses or focusing mirrors once, reflecting mirrors once a month)
There are mirrors and lenses on the machine. The laser light is reflected by these lenses, directly focused or focused, and then emerges from the laser hair. The lens is prone to dust and other contaminants, resulting in laser loss or lens damage.
Maintenance method: Check the mirror every two months, check the protective lens or focusing lens before and after work every day, if it is dirty, remove it with a rubber ball first, if it cannot be removed, use cleaning products and absolute ethanol , Wipe gently with the same direction, if there is damage, replace immediately.